Original Quality 86840-9KB0A Three-Point Seat Belt for Nissan Sentra Sylphy 2019

FAQ

Q1: What are the specific models and parameters of the original factory seat belts for the 2019 Nissan Versa? 
A: The 2019 Nissan Versa (with chassis code B18) comes with three-point emergency locking seat belts (ELR) as standard equipment for the entire model range. 
Webbing specification: Standard width 48mm, made of high-tensile polyester fiber (Polyester). 
Roller type: Mechanical emergency locking (ELR), compliant with ECE R16 and FMVSS 209/302 standards. 
Retainer: The front seats (both driver and passenger) are usually equipped with pyrotechnic pretensioners and load limiters; the rear seats are typically equipped with mechanical retainers. 
Color code: Commonly it is "Charcoal Black" (charcoal black) or "Beige" (beige), and the exact color needs to be verified by checking the VIN code.

Q2: Are the seat belts of the older Nissan Versa (Classic/Bluebird) models interchangeable? 
A: It is not fully universal. The installation holes for the seat belt brackets of the 2019 Nissan Versa (B18 platform) are slightly different from those of the previous generation (B17). Please provide pictures of the different sides of the seat belt for this vehicle, as well as the VIN code (chassis number) or Part No. of the vehicle for verification to avoid incorrect dispatch and prevent installation failures.

Q3: After replacing the seat belt, the "SRS Airbag Light" on the dashboard keeps flashing. How should we handle this? 
A: This is the most common problem. The reasons are as follows: 
Resistance matching: The seat belt buckles of the 2019 Nissan Versa are equipped with built-in weighing sensors. If a cheap buckle without a sensor is used, or if the plug is not properly inserted, the SRS indicator light will illuminate. 
Solution: When replacing, it is essential to ensure that the new seat belt wiring connector is fully compatible with the original vehicle. If the replacement is done by the repair center, it is recommended to use a dedicated diagnostic tool (such as Consult-III or universal OBD tool) to clear the fault codes. If the light is still on, check if the yellow connector below the seat belt socket is oxidized.

Q4: If the elastic band gets dirty, can it be washed with water or cleaned with bleach? 
A: No. 
The fabric layer contains high-strength fibers, and chemical solvents will damage the fiber strength. 
Correct procedure: Use neutral soap solution and a soft-bristled brush to gently scrub. Let it air dry. Do not dry it with a machine or expose it to direct sunlight. High temperatures can cause the fabric to shrink and become brittle.

Special Notice from the Maintenance Center 
The middle seat in the rear row of the 2019 Nissan Versa usually has two-point seat belts (belts) on the sides, while three-point belts are on the front and back. When ordering accessories, please make sure to distinguish between the left and right sides (LH/RH) as well as the front and rear rows, because the installation direction of the curtain retractors is different.